2
WORK HERO 10L DRY CANISTER
IMPORTANT
Always switch off the cleaner and remove the plug from the mains power supply before
cleaning your appliance, when not in use or attempting any maintenance task. The cleaner
must only be connected to an AC power supply at the voltage shown on the rating label. This
cleaner should only be used for its intended purpose as described In this Instruction manual.
PRECAUTIONARY MEASURES:
1.
Do not
operate the vacuum cleaner too close to heaters, radiators and other
hot surfaces.
2. Before inserting the plug into the wall, make sure your hand is dry.
3. Before turning on the vacuum cleaner, remove any large or sharp objects from
the floor or cleaning surface in order to prevent damage to the filter.
4. When you want to pull the plug from the wall,
do not
use the power cable,
gently pull the plug from the power socket.
5. Do not use vacuum cleaner to pick up water or liquids.
When using your vacuum cleaner, basic
precautions should always be observed,
including the following;
1. This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge, unless they have been
given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
2. Children should be supervised to
ensure that they do not play with the
appliance.
3. To prevent electrical shock, do not
immerse the appliance, power cord or
power plug into water or other liquids.
4. To prevent electrical shock, do not use
the vacuum cleaner outdoors or on wet
surfaces.
5. Always check the power cord before
use. The power cord and the plug
should be in a good condition and must
not be damaged. If the power supply
cord is damaged or defective, it must
be replaced by the manufacturer, its
service agent or similarly qualified
person in order to avoid a hazard.
SAFETY PRECAUTIONS & WARNINGS
IMPORTANT! Always switch off the cleaner and remove the power plug from
the electricity power supply before cleaning your appliance, when not in use or
attempting any maintenance task. The cleaner must only be connected to an AC
power supply at the voltage shown on the rating label. This cleaner should only
be used for its intended purpose as described in this instruction manual. Never
operate the vacuum cleaner without filters.