9
ASSEMBLY INSTRUCTIONS:
We recommend that two adults work together to assemble this game.
1) Open the carton of your new table game near where you will play. Select a clear level floor. This game requires at least two adults to
assemble the table.
2) Remove all the contents from inside the carton and verify that you have all listed parts as shown on the Parts List. NOTE: The player-rods
are pre-assembled .We suggest that you use the bottom carton as a clean flat working area to protect the game. Carefully cut or tear the
four carton corners so that the bottom is now your work area.
FIG.1.
3) Place one Side Apron (#1) with slotted side facing inward and the finished edge facing down. Slide the Player Rods (#13 through #20)
through the Player Rod Bushing in the order shown in FIG.1.NOTE:Make sure that the player rods are installed properly. The players for
each team must be facing the same direction.
4) Now slide the other Side Apron (#1) over the other ends of the Player Rods with the slotted side facing inward.
FIG.2.
5) Attach one End Apron (#2) between the Side Aprons (#1) using two of Washer Head Screws (#10) per Side. NOTE: Leave connections
loose - Do not tighten screws securely at this time.
6) Slide the Playfield (#3) with graphics facing down as shown in FIG 2.If the field does not slide smoothly, check to be sure you have not
over tightened any screws or the playfield is not caught by the slot.
FIG.3.
7) Repeat the step to attach the other End Apron to the Side Aprons (#1).
8) Place two Support Braces (#4) on Playfield (#3) as shown in FIG.3.Attach them using two of Washer Head Screw (#10) per side. See
FIG.3.
FIG.4.
9) Put Hand Grips (#21) and End Caps (#22) on the player rods in order. NOTE: To make the Handles easier to attach, spray a little window
cleaner on the rod ends prior to installation and tap on gently with a hammer. See FIG.4.
10) Attach Goal Boxes (#27) to End Aprons using five of Washer
Head Screws (#9) per Goal Box.
43
FERRULE
1SET
44
SCORER
4EA
45
ALLEN WRENCH
1EA
46
BASKETBALL
2EA
47
STEEL SLICE
4EA
48
A BASKET RING
1EA
49
SLIDEWAY NET
1EA
50
HOB
1EA
51
HOB
2EA
52
BACKBOARD
1EA
53
BRUSH
1EA
FIG.1
FIG.2
