Work Pro SPS 8, Руководство пользователя, Страница: 5 / 26

Ethernet port , for the connection of SPS 8 to the local network. It is compatible
with PoE, therefore it can be supplied through the Ethernet port, avoiding the
need of connecting it to an external power supply. It must be taken under
consideration that for the direct conection to a PC it is necessary to use a cross
network cable (it is not necessary unless your System is compatible with Auto-
MDIX).
Euroblock A connection , to connect the external power supply source
(+5VDC)and the alarm System. It is usually an open contact. It can be
programmed with one or several OSC commands that can be assigned to the
alarm event.
Euroblock B connection, to connect to the the monitor audio output. The
signal provided by this connection is the same that the one of the Ethernet. It is
an unbalanced audio output.
RCA connection , to connect the audio source of the auxiliary input.
XLR-3 base , to connect a dynamic microphone to the SPS 8. If other type of
microphone is used, it could damage the paging station.