Work Pro SCAN 812 DMX, Руководство пользователя, Страница: 8 / 12

Running Chases
Manual Mode
Auto Mode
AUTO/DEL
CHASE BUTTONS 1-6
SPEED FADE TIME
Music Mode
CHASE BUTTONS 1-6
MUSIC/BANK COPY
MIDI Operation
MIDI/REC
BANK
ENGLISH
You must program scenes before you can run chases.
BANK
1 . When the power is turned on, this unit enter Manual mode automatically.
2 . Select your desired chase by tapping one of the six Chase buttons. A second tap of this button
will deactivate this function.
3 . Use the Speed slider (or Tap Sync button) and Fade Time slider to adjust the current scenes
to your desired effects.
4 . Use the Bank Up/Down button to scroll through the chase to run all banks of scenes.
1 . Tap the Auto/Del button to activate Auto mode. A highlight nex to
AUTO TRIGGER will indicate Auto mode.
2 . Select yor desired chase by tapping one of the six Chase buttons.
A second tap of this button will desactivate this function.
3 . Use the Speed slider (or Tap Sync) and Fade Time slider to adjust
the chase to your desired effects.
You may select several chases at a time, the chases will run in
sequence that you select the chases.
1 . Tap the Music/Bank Copy button to activate Music mode. A
highlight in the Segment Display next to MUSIC TRIGGER will
indicate Music mode.
2 . Select your desired chase by tapping one of the six Chase
buttons, the chase will be triggered by the music rhythms.
You may select several chases at a time.
MIDI Channel Setting
1 . Press and hold down the MIDI/Rec button for three seconds,
the last two digits of the Segment Display will flash to indicate
MIDI channel setting is ready.
2 . Use the Bank Up/Down button to select the DMX channel 01-
16 to assign to MIDI channel.
3 . Press and hold down the MIDI/Rec button for three seconds
to store your setting and to deactivate MIDI setting.
If you wish to give up your setting, tap any other button (except
Bank Up/Down buttons) to exit MIDI mode.
7