Work Pro PA 9500 CDT Series, Руководство пользователя

Страница: 6 / 20

¡ 2 ¡
!
HANDLE THE POWER CORD GENTLY.
¡To disconnect the plug from the AC outlet, pull on the plug itself,
not on the cord.
¡Disconnect the plug from the AC outlet whenever the unit is to be
left unused for an extended period of time.
¡ Do not placer furniture or the heavy objects on the cord, and avoid
dropping heavy objects on it. Also do not make a knot in the cord.
¡Check if the power supply is being shot down, the power line is
pulled out from outlet and other lines connecting this unit are also
disconnected.
!
PLACE THE UNIT ON A FIRM AND LEVEL SURFACE.
Avoid installing it:
¡ In moist or humid places.
¡ Close to heating equipment or in places exposed to direct sunlight.
¡ In a direct draft from an air conditioner or in other very cold locations.
¡ In placers subject to excessive vibration or dust.
¡ In poorly ventilated places.
!
MOVING THE UNIT.
¡ Befo moving the unit, be sure to unplug the power cord from the re
AC outlet and disconnect all wires antennas and other components.
CAUTION :
DO NOT OPEN THE CABINET.
¡ Do not attempt to service this unit. Tampering with internal
components can cause fire or shock, and may void tour guarantee.
If water or a small object enters the unit, unplug the power cord
Immediately and call a qualified technician or consult our company,
or consult an authorized.
WARMING : CAUTION FOR TEMPERATURE
¡ Don't touch the screw around the ventilation holes in the bottom
board. When heat-sink working, the screw and the board temp-
erature rises higher.
!
Before you press the power button to on. Be sure to the all volume
VR to minimum.