8
1
2
EN
3
User Manual/Manual de Uso NEO Passive/Pasivas
The NEO Passive/Pasivas is rated to IP54 which means there is
ingress
protection.
The NEO Passive/Pasivas is designed for both indoor and outdoor operation where it is protected
from direct exposure to water (e.g. under a canopy). The use of protection from water and
humidity for the connection terminals is highly recommended (e.g. sealant/mastic).
limited dust and water
IP54 weather proof rating
5
1
Rear wall mounting part
Threaded Ball
M10 nut
Rear threaded insert
(a)
(a)
Mounted to loudspeaker
2
3
4
5
6
7
Allen Screw 45 mm x M6
M6 nut
6
7
Plastic Wall-mount bracket (NEO 4, NEO 5, NEO 6, NEO 8)
Screw eyelet for safety cable
(a) (b)
3
4
42 mm
5 mm
45 mm
45 mm
Ø
Mounting Process
Use the wall mounting part (1) to mark the fixing points
on the wall. Take into account the dimensions between
holes and the diameters marked in figure 1.
Drill wall and insert wall fixings. Screw wall mounting part to wall.
Ensure that suitable screws and wall fixings are used.
If in any doubt contact a suitably qualified expert.
Mount (3), (4) & (5) as shown in figure 2. Screw the threaded ball (4)
into the threaded insert on the rear of the loudspeaker (6) (loudspeaker not shown below).
Tighten M10 nut (5) against the loudspeaker with a spanner.
The assembly will now be as shown in figure 3.
figure 1
figure 2
figure 3
