Work Pro DMXnet 4, Руководство пользователя

Страница: 4 / 8

Controls & Functions:
FRONT
SIDE
REAR
SIDE
1 2 3 4
5 6 7 8 9 10 11
1. Power LED : This LED in red color, will iluminate when there is power currently being
supplied to the unit.
2. LINK LED : This yellow LED in on when the Ethernet LAN port is connected to the network.
3. DATA LED : This green LED blinks when the Ethernet port is transmitting the data.
4. DMX 1-4 LEDs : This blue LEDs blinks when the output is working fine. In the LEDs are ON,
the output disable.
5. Subnet selector : In ArtNet, dispswitch 0-F allow to select the Subnet, with the value from 0
to F (16 positions)
6. UNIV selector : Allows to select one of the 16 DMX universes in the configured Subnet.
7. LAN : RJ 45 connector which allows to connect to the network.
8. DMX Outputs : These XLR connectors send the converted DMX signal to a control line with
compatible DMX devices like moving heads, scanners, RGB drivers, etc.
9. Fuse : F3.15A, 250V, 50/60 Hz
10. Power input : AC 96-264 V 50/60 Hz.
11. Power Switch : This is the main power switch and turns power on and off.
Universe setup:
- Select with the switch (5) , the Subnet.
- Select the first universe with the switch (6) . This universe will be output 1 and, the following
universe will be output 2 and sucessively.
EN
DMXnet 4 - 2 -
User Manual/Manual de Uso