BLR2 MKII
USER MANUAL
VERSION 1.0
BLUELINE DIGITAL MKII SERIES
www.workpro.es
12
General Purpose Inputs Outputs, the device includes 2xGPIs and 2xGPOs.
-
GPIs: Inputs that senses logic voltage variations, in order to send UDP/OSC control
commands when a variation occurs. A typical configuration would be the connection
of a push button between one GPI and GND, so when the push button is pressed the
UDP/OSC commands programmed are sent to the network.
-
GPOs: Outputs in open collector configuration, which once activated let flow current
through them. A typical configuration would be the interconnection of the coil of a
relay.
RJ45 port for LAN connection. Allows PoE power (Class 0 802.3af).
Next to the RJ45 connector you will find two LEDs indicating the status of the device:
LINK (green) Indicates that the BLS2 Lite MKII is connected to the LAN
ACT (orange) Indicates that packets are being sent or received
This port allows the connection of a BLC 1 wall controller acting as a local controller. In this
way, it is possible to select the audio source to be extracted and its volume.
Power input for external source. The admitted voltage can be between 12/24 Vdc, with a
minimum current of 500 mA.
4.2.3.
GPIOs
4.2.4.
LAN port
4.2.5.
Control
4.2.6.
Main supply input
