Work Men 5411074164935, Оригинальное руководство пользователя

Страница: 23 / 48

23
Assembly
Changing the Tool
Before any work on the machine itself, pull
the mains plug.
When mounting the saw blade, wear
protective gloves. Danger of injury when touching
the saw blade.
Mounting/Replacing the Application Tool/
Accessory
Mount the application tool/accessory (e.g. plunge
cut saw blade 5) in such a way on the tool holder 4
that the openings of the tool engage into the cams
of the tool holder.
For a safe and fatigue-free working position it is
possible to position the application tools/accessories
in any snap-in positions on the tool holder. Position
the tool in such a way that the depressed centre
points downwards (marking on the tool is readable
from above, see figure on the graphics page).
Use the screw 6 to fasten the application
tool/accessory.
Tightly fasten the screw 6 with the allen key 7.
Check the tight seating of the application tool/
accessory. Incorrect or not securely fastened
application tools/accessories can come loose during
operation and pose a hazard.
For removing the application tool/accessory loosen
the screw 6 with the allen key 7 and remove the
tool.
Mounting/Replacing a Sanding Sheet on the
Sanding Plate
The sanding plate 8 is fitted with Velcro backing for
quick and easy fastening of sanding sheets with
Velcro adhesion.
Before attaching the sanding sheet 8, free the
Velcro backing of the sanding plate 9 from any
debris by tapping against it in order to enable
optimum adhesion.
Position the sanding sheet 9 flush alongside one
edge of the sanding plate 8, then lay the sanding
sheet onto the sanding plate and press it against it
with a light turning motion in clockwise direction.
To ensure optimum dust extraction, pay attention
that the punched holes in the sanding sheet match
with the holes in the sanding plate.
To remove the sanding sheet 9, grasp it at one of
the tips and pull it off from the sanding plate 8.
Sanding accessories, such as fleece pads/polishing
cloth pads, are attached to the sanding plate in the
same manner.