42 mm
5 mm
45 mm
45 mm
Ø
Mounting Process
Use the wall mounting part (1) to mark the fixing points
on the wall. Take into account the dimensions between
holes and the diameters marked in figure 1.
Drill wall and insert wall fixings. Screw wall mounting part to wall.
Ensure that suitable screws and wall fixings are used.
If in any doubt contact a suitably qualified expert.
Mount (3), (4) & (5) as shown in figure 2. Screw the threaded ball (4)
into the threaded insert on the rear of the loudspeaker (6) (loudspeaker not shown below).
Tighten M8 nut (5) against the loudspeaker with a spanner.
The assembly will now be as shown in figure 3.
figure 1
figure 2
figure 3
PAGE 8
User Manual NEOi Series
figure 4
Slide the hooks of the
front threaded part (2)
down in to the slots of the
wall mount part (1). (figure 4)
