Work Area Protection SMART CUSHION INNOVATIONS SCI100GM, Руководство по проектированию и установке

Страница: 9 / 60

5
Drawings
The following SMART CUSHION
®
transitions and layouts are available from Work Area Protection Corporation. Diagrams are
shown in the Appendices as follows:
•
Layout – Gore Assembly, Appendix F & F2 - Rigid design for wide obstacles
•
Layout – Gore Assembly Calculations, Appendix F3 - Used to calculate longitudinal distances and parts requirements
•
Transition - Jersey/F Shape, Appendix G - Used on standard Jersey/F shaped barriers with a 24 inch Base
•
Transition - Concrete Block, 24 Inch, Appendix H - Used on 24 inch Concrete Block that must be 30 inch longitudinal
length for our travel zone
•
Transition - Concrete Block, 30 Inch, Appendix I - Used on 30 inch Concrete Block and will extend our installation
length 38 inches
•
Transition - Concrete Block, 36 Inch, Appendix J - Used on 36 inch Concrete Block and will extend our installation
length 52 inches
•
Transition - Concrete Block, 30 Inch, Flared, Appendix K - Used on 30 inch Concrete Block/Pillars and will extend our
installation length 52 inches
•
Transition - Concrete Block, 36 Inch, Flared, Appendix L - Used on 36 inch Concrete Block/Pillars and will extend our
installation length 71 inches
•
Transition – Thrie-Beam Rigid Assembly, Appendix M - Rigid design for possible reverse direction impacts
•
Transition – W-Beam Rigid Assembly, Appendix N - Rigid design for possible reverse direction impacts
•
Transition – Jersey, Median Barrier Variable Width, Appendix O - Used on Jersey Shape barrier with base widths of
30 - 38 inches wide.
•
Transition – Single Slope Barrier, Appendix -P - Used on 42 inch and 48 inch Single Slope barrier up to 26 inches
wide at the base
•
Transition – W-Beam 28 Inch High, Appendix Q – Connection to 28 inch high W-Beam Guardrail with no reverse
direction traffic
•
Transition – W-Beam 32 Inch High, Appendix R – Connection to 32 inch high W-Beam Guardrail with no reverse
direction traffic
•
Transition – Wide Block Spanner, Appendix S – Connection to a wide Concrete Block for one sided protection
•
Transition – Wide Block Offset, Appendix T – Connection where rear oncoming contact with the back side is not possible
•
Transition – 36-44 Inch Flush Mount, Appendix U – Incremental widths for Bi-directional traffic.
•
Transition – 46-48 Inch Flush Mount, Appendix V – Incremental widths for Bi-directional traffic.
•
Transition – 50+ Inch Gore Reverse Direction Flush Mount, Appendix W – Incremental widths for Bi-directional traffic.