Worcraft CHS-S20LiB, Инструкция по эксплуатации

Страница: 56 / 66

Do not sharpen the saw chain yourself, unless you are experienced in doing so. Please obtain the replacement saw chain or
have your chain sharpened professionally at your authorized after-sales service.
Checking the Automatic Oiler
Proper functioning of the automatic saw chain oiler can be checked by running the chain saw and pointing the tip of the chain
bar towards a piece of cardboard or paper on the ground. Do not touch the ground with the chain and ensure a safety clearance
of 20 cm. If an increasing oil pattern develops, the automatic oiler is operating fine. If there is no oil pattern despite a full oil
reservoir.
After Use/Storage
Remove the oil from the reservoir before storage.
Clean the moulded plastic housing of the chain saw using a soft brush and clean cloth. Do not use water, solvents or polishes.
Remove all debris, especially from the motor cooling vents.
After 1
– 3 hours of use, remove the cover, the chain bar and the saw chain, and clean them using a brush.
Clean the area under the cover, the drive wheel and the chain bar assembly from adherant debris using a brush. Clean the oil
outlet with a clean cloth.
Be sure to make sure that sawdust and debris are removed and can not block the oil pipes and oiling system.
If the chain saw is to be stored for a longer period of time, clean the saw chain
and the chain bar.
Store the chain saw in a secure, dry place, out of the reach of children.
Do not place other objects on the power tool.
Please take care to place down the chain saw with the oil filler cap
facing upward.
When storing in the sales packaging, the oil reservoir must be completely emptied.
Do not modify this product. Unauthorized modifications may impair the safety of your product and may result in increased
noise and vibration.
ENVIRONMENT PROTECTION
In order to prevent the machine from damage during transport, it is delivered in a sturdy packaging. Most of the packaging
materials can be recycled. Take these materials to the appropriate recycling locations. Take your unwanted machines to your
local dealer. Here they will be disposed of in an environmentally safe way.
Li-ion batteries can be recycled. Deliver them to a disposal site for chemical waste so that they can be recycled or
disposed of in an environmentally friendly manner.
Discarded electric appliances are recyclable and should not be discarded in the domestic waste! Please actively
support us in conserving resources and protecting the environment by returning this appliance to the collection
centres (if available).
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in conformity with the following standards or standardized
documents: EN ISO12100:2010; EN62841-1:2015; EN55014-1:2017; EN55014-2:2015; EN61000-3-2:2019; EN61000-3-
3:2013+A1:2019; in accordance with the regulations 200
6/42/ЕС, 2014/30/ЕU.
NOISE/VIBRATION Measured in accordance with EN ISO12100 the sound pressure level of this tool is <89,6dB(A) and the
sound power level is <96.2dB(A) (standard deviation: 3 dB), and the vibration is <4,43 m/s
2
,k=1.5m/s
2
.
AKKU-
KETTENSÄGE
BESTIMMUNGSGEMÄßER GEBRAUCH
Das Elektrowerkzeug ist bestimmt
zum Sägen von Holz wie z.B. Holzbalken, Bretter, Äste, Stämme usw. sowie zum Fällen von
Bäumen. Es kann für Schnitte längs und quer zur Faserrichtung verwendet werden.
Dieses Elektrowerkzeug ist nicht geeignet zum Sägen von mineralischen Werkstoffen.
LIEFERUMFANG (Abb. 3)
Sehr geehrter Kunde,
Vielen Dank, dass Sie sich für unsere Produkte entschieden haben. Bitte prüfen Sie die Vollständigkeit des Artikels gemäß den
Angaben im Lieferumfang. Bei fehlenden Teilen wenden Sie sich bitte an unser Service Center oder die Verkaufsstelle.
1. Mini-Kett
ensäge
2. Kettenschutzabdeckung
3. Eine Flasche Schmieröl
Achtung! Die Ausrüstung und das Verpackungsmaterial sind kein Spielzeug. Lassen Sie Kinder nicht mit Plastiktüten, Folien
oder Kleinteilen spielen. Es besteht Verschluck- oder Erstickungsgefahr!
TECHNISCHE DATEN (Abb. 1)
Modell CHS-S20LiB (RLC20HS6-
HP)
Fassungsvermögen des
Ölbehälters
40ml
Stromspannung 20Vd.c.
Automatischer Kettenöler
ja
Kettengeschwindigkeit 7.5m/s Empfohlener Akku CLB-20V-2.0/ CLB-20V-2.0H
Stangenlänge
150mm Schalldruckpegel LpA=89,6dB(A), K=3 dB(A)
Schnittleistung 145mm Schallleistungspegel LwA=96,2dB(A), K=3 dB(A)
Max. Schneidezweig
Φ14cm
Vibrationspegel ahv,eq=4,43m/s
2
, K=1,5m/s
2
Kettenspanntyp Automatisch
Erklärung
99dB(A)