replace worn or damaged elements and the screws in sets.
- Always ensure a firm stance on the slopes and do not operate the cultivator on steep slopes.
- While working you have to walk and do not run.
- Be careful when starting the engine and follow the manufacturer's instructions, keeping the feet and the
blades out of the way.
- Do not reach under or near rotating parts with your hands or feet.
- Never lift or carry the machine while the engine is running.
- Under any circumstances do not perform any changes to the device. Unauthorized changes could adversely
affect safety of your device and result in increased noise and vibration.
- Switch off the electric tiller and remove the electric plug from the socket:
a) every time you move away from your device,
b) when you want to remove dirt blocking the device,
c) during inspection, cleaning or performing other actions on the device(repairing it),
d) if it starts to vibrate abnormally (check immediately).
- Check and maintain tightness of all nuts and bolts and ensure safe operation of the machine.
- For safety purpose, replace worn or damaged parts.
ASSEMBLY
UNPACKING
- Carefully unpack the machine from the box.
- Check the contents of the package and contact your seller or the manufacturer if any parts are missing or
damaged.
- Do not dispose of packaging materials until the contents of the package have been checked.
- Never leave packaging materials (eg plastic bags, paper clips, etc.) in the immediate vicinity of children and
do not allow them to play with them. There is a risk of swallowing or suffocation.
- Dispose of packaging materials in an environmentally friendly manner in accordance with applicable
regulations.
- In case of doubt, do not use the machine and contact an authorized service center.
PACKAGE CONTENTS
- Engine housing with hoeing blades and support arch.
- Right handle with locking button and strain relief mechanism for extension cable.
- Left handle.
- Plastic cross-plate.
- Mounting tools, cable clamps.
- User's manual.
ASSEMBLY
- Before starting the installation, switch off the device, disconnect the plug from the wall socket and secure
it against unintentional switching
- Take special caution when attaching the power cord to avoid damaging it.
1. Attach the power cable retaining clips to the right handle (1a).
2. Slide the handles (1a, 1b) into the corresponding holes in the plastic cross-plate (3) and fasten with the
supplied screws.
3. Route the power cable through the corresponding hole in the plastic cross-plate (3).
4. Attach the already assembled part (handles (1a, 1b) and plastic cross-plate (3)) to the support arch (5).
5. Insert the fixing screws into the corresponding holes and tighten them with the wing nuts (4).
6. Use the power cable clamps (6) to secure the power cable to the support bracket (5).
