Worcraft PROFESSIONAL WPGT306, Инструкция по эксплуатации

Страница: 47 / 54

a) To maintain the tool by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the tool is maintained.
7) Exposure to vibration
Working with this device generates vibrations in the hands and arms.
Take steps to reduce the impact of vibrations:
- Take frequent breaks or change activity if the vibrations are strong,
- Keep your hands warm,
- Do not over tighten the handles of the machine during the work,
- Work only with machines and abrasives flawless technique,
- If you work with a machine whose speed is adjustable, set it to the level required for
the particular job. In case of non compliance with the above recommendations,
working with strong vibrations over a long period may cause health problems.
Warning: The emission of vibrations emitted by the tool in normal use may differ from
the declared value depending on how it is used.
Disclaimer: The appropriate measures should be taken to protect the user based on
an estimate of exposure during normal use of the tool (taking into account all stages
of the cycle of use: shut down load operation, tool operation in use) Note: The use of
other tools will reduce the total work time with this tool.
5. SPECIFIC WARNINGS
Safety Instructions: Battery and Charger
The charger should not be exposed to rain and moisture in general. A risk of electric
shock exists if moisture gets inside the unit.
Do not use a charger other than that recommended by the manufacturer to charge the
battery. The chargers designed to charge a given battery type can catch fire if used
with other batteries.
Do not use this charger to charge other batteries. The charger is designed to recharge
the lithium-ion battery type and voltage specified. Using the charger with other batteries
poses a risk of fire, explosion or injury.
The charger should be kept clean. A risk of electric shock exists if the charger is too
dirty.
Before each use, check the charger, cable and plug. If you find damage, do not use
the charger. Do not open the charger yourself.
All repairs must be entrusted to a qualified specialist who will only use original spare
parts. The increased risk of electric shock if the charger, cable or plug are damaged.
The charger should not be placed on a surface used highly flammable (paper, textiles
etc..)
Or in an environment with a risk of fire. The charger heats during operation and can
cause a fire.
Incorrect use can cause leakage of battery fluid. Avoid contact with the liquid. In case