13
Operation
6 720 612 220 GB (05.09)
4.2
Change room temperature and
operating mode
4.2.1
Set room temperature time
restricted
To permanently change the room temperature,
see Chapter 5.4.2 on page 21.
Without the RT 10 this function is not available.
If an RT 10 is connected and the standard dis-
play is displayed in Automatic mode :
B
Set required room temperature with
.
The temperature setting is effective until the
next switching time. After this the room tem-
perature set for the heating program is valid.
4.2.2
Advance the next switching time
and associated operating mode to
the current time
To permanently change the operating mode, see
Chapter 4.2.3 on page 14.
Heating Advance
If the standard display is displayed in Automatic
mode :
B
Press
to advance the next switching
time and associated operating mode
=
High
or
On
=
Low
or
Off
=
Frost
for the heating to the current time.
The display shows
Heating Advance on
and the altered data.
If the next switching time of the heating pro-
gram is exceeded,
Heating Advance on
is
reset and Automatic mode is active again.
To cancel
Heating Advance on
:
B
Press
again.
Hot Water Advance
If the standard display is displayed in Automatic
mode or continuous economy is displayed:
B
Press
to advance the next switching
time and associated operating mode
On
or
Off
for hot water heating to the current time
The display shows
Hot Water Advance on
and the altered data.
If the next switching time of the hot water pro-
gram is exceeded,
Hot Water Advance on
is
reset and Automatic mode is active again.
Hot Water Advance on
Cancel in advance:
B
Press
again.
i
Use the function if there is no
longer a demand for heat or if the
home is to be left for a longer pe-
riod or if an unexpected return to
the property occurs.
advance
advance
advance
advance