WOR(I)D Helo LX+, Руководство пользователя

Страница: 11 / 20

USER GUIDE - EN
HOW TO CHARGE HELO™ LX+
To recharge your wristband, you need to apply the
underlying part to the charger adapter.
You can connect to the adapter using the provided
USB cable, through which you can recharge HELO™
LX+ both from your PC or from a common USB
charger. Make sure that adapter has a maximum
voltage of 5V and maximum current of 0.5A.
The battery lasts about 5 days and needs about 2
hours to be fully charged.
The duration of the battery depends on the use
of HELO: the calculations regarding the duration
refer to normal usage, with a correct charge of
the battery.
At the beginning of charging, if you do not see the
red LED on, wait a few minutes and try to turn on
HELO™ LX+ by pressing the button for 2 seconds.
Charge HELO™ LX+ until the top green LED turns
on, indicating that charging is complete. If HELO™
LX+ doesn’t charge try to clean/scratch the
charging connectors of device and repeat the
procedure from the beginning.
Given the reduced charging times and to avoid
losing of nighttime measurements, charge HELO™
LX+ during the day.
Note: The power adaptor is not included. You can plug
the USB cable in a USB port of your computer or in a wall
power adaptor.