Wopa SA0049, Руководство пользователя

Страница: 27 / 31

User manual
Hoof trimmingcrush:SA0049
Version: 22-12-15
Page 27 of 31
6.4. Check oil level/replace oil.
EXPLANATION

Checking the oil level ensures that the necessary minimal amount of oil is
present. The cylinders must be retracted for this purpose.

The general rule is that the oil and filter should be replaced every two years.

Gauging the oil level
No. What to do Action Result
1. Retract the cylinders.

Put the cylinders in the installation in
their retracted position by operating
the valves.
2. Check the oil level.

The oil level must now be between
the minimum and maximum levels
(see instructions on "changing the
oil").

Changing the oil
No. What to do Action Result
1. Bring the oil to the
tank.

See the instruction on "gauging the oil
level".
2. Empty the tank

Remove the plug from the tank and
allow the oil to run out until it is empty.
3. Fill the installation.

Fill the tank via the filler cap.
4. Check the oil level.

The oil must be between the two lines
on the filler cap dipstick.

The following types of oil are suitable for use in the hydraulic installation:
Supplier

Summer oil

BP

Energol HLP-HM 68

Agip

OSO 68

Aral

Vitam GF 68

Beverol

Inula 68

Castrol

Hyspin AWS 68

Elf

Elfolna 68

Esso

Nuto H 68

Fuchs

Renolin D 68

Kroon Oil

Perlus AF 68

Mobil

DTE 26

Pennzoil

AW Hydraulic Oil 68

Q8

Haydn 68

Shell

Tellus 68

Sunoco

Sunvis 800 WR 68

Texaco

Rando HD68

Total

Azolla ZS 68

Unil

HFO 68
Figure 6: hydraulic fluids to be used