User manual
Hoof trimmingcrush:SA0018/SA0022/SA0026
Version: 24-09-14
Page 16 of 26
1
3
2
4. Installation
EXPLANATION
Consult the technical data and the circuit diagram provided for the correct
specifications.
4.1. Location
CAUTION
The machine must be transported and installed upright.
Place the machine on a level and stable substrate
Take account of the instructions in Section 3 when carrying out any activity.
Failure to follow these may lead to serious injury.
Figure 3
:
location of crush
No.
What to do
Action
Result
1. Install the anti-tipping
bar
Slide the anti-tipping bar (Figure 3:3)
into the recesses in the crush to
increase lateral stability.
2. Slide out the front
gate stops
(SA0022/SA0026/SA0
039B).
The stops (Figure 3:1) are slid in for
transportation.
Press in the locking balls (Figure 3:2).
Slide out the stops to allow maximal
travel of the front gate.
