1
3
2
4
Min.
5cm
Max.
40cm
Sensitivity is adjustable by setting the
volume on the sensor body
4
Sensitivity Adjustment
5
Toggle mode / Pulse mode
6
Mounting Information
The sensor can be placed behind tiles,
wood, plaster, plastic and glass.
Do not place the sensor behind
metallic plates.
Do not place the sensor in the opening
range of the door.
Avoid moving objects in front of
the sensor
5cm
40cm
Toggle mode :
Recommended for Switch applications.
In toggle mode, a detection activates the relay and a
second detection deactivates it again. In door applications,
the door stays open after the first activation.
Pulse mode :
Recommended for automatic door applications.
In pulse mode, a detection activates the relay for a short
period of time (depending on the duration of the movement in
front of the sensor).
T
P
Min. 1s
Relay ON
Relay OFF
Relay ON
Relay OFF
DOOR OPENS
DOOR CLOSES
DOOR OPENS
AND CLOSES
DOOR OPENS
AND CLOSES
M
icrowave Touchless
Switch (MG100)
Instruction Manual
The MG100 is a highly sensitive, high performance switch designed to activate
automatic doors by detecting the movement of a person or object. For the safe and accurate
use of this product, please read this instruction manual carefully.
1
Technical specifications
Technology :
Microwave Motion Sensor
Microwave Module :
24.125GHz
Product Size :
85.9mm
ˣ
85.9mm
ˣ
20mm (W
ˣ
L
ˣ
H)
Detection Range [Hand] :
±5~40cm
Detection Mode :
Motion (Bi-directional)
Speed of Target :
Min. ±3cm/s, Max. ±1.5m/s
Power Supply :
DC 12~30V, AC 12~24V
Current Consumption :
< 1.4W
Output :
Relay Contact (1A/24VDC)
Output Hold Time :
1.2Sec. (PULSE mode)
Operating Temp/Humidity :
-20°C~+50°C/0~90%
International Protection : IP55
2
General Information
Caution
Do not supply power during installation.
Do not disassemble or modify the device, it may cause fire or electric shock
Cable Hole
Screw Hole
Sensitivity Volume
Output Mode:
Toggle or Pulse
Terminal
Block
LED
Sensing Module
Front Case
Inner Case
Waterproof Pad
Disassemble Front Case
Use a screwdriver to
remove the front case.
3
Installation Guide
1
Affix mounting template
and drill holes
2
Waterproof pads are
attached to the inner case.
3
Fix the case to the wall
4
Connect power and relay wires
to the terminal block.
Inner Case
Waterproof Pad
POWER
COM
NC
NO
DC 12~30V
AC 12~24V
How to remove the Clearwave cover
after installation
1
2
1.
Insert flat headed screwdriver.
2.
Turn screwdriver gently anti-clockwise
