http://www.woosim.com
17
X
Press
FEED button
one time.
→
You will see present
STOP BIT
mode in the LCD.
→
Press
MODE Button
one time.
(The stop bit has set to 2 stop bit.)
X
Press
FEED button
one time.
→
You will see present
DENSITY
mode in the LCD.
→
Press
MODE Button
two times.
(The density has set to high.)
If all the mode have set, press the
FEED Button
and the
MODE Button
at the same time
after then release the buttons at the same time.
The printer will print out the mode status which has modified.
(Bluetooth/38,400 BPS/ 7 DATA BIT/Even Parity/ 2 STOP BIT / Density HIGH)
If the status is not correct, please try it again according to the procedure.
