Porti-SC30 Rev. 2.0
http://www.woosim.com
16
u
When you press
FEED Button
twice,
Power Lamp
flickers 7 times
and
Error Lamp
flickers twice.
→
Press
MODE Button
once,
Error Lamp
flickers twice.
And then the mark has set to
Marm no use
.
u
When you press
FEED Button
once again,
Power Lamp
flickers 8 times
and
Error Lamp
flickers once.
→
Press
MODE Button
once,
Error Lamp
flickers twice.
And then the sensor has set to
Sensor medium1
.
If all the mode have set, press the
MODE Button
and the
FEED Button
at the same time
after then release the buttons at the same time.
The printer will print out the mode status which has modified.
( Bluetooth / 57,600 baud / 7 data bit / Odd parity / Density high / Mark no use
/ Sensor Medium1 )
If the status is not correct, please try it again according to the procedure.
