WOOSIM Porti-M200H Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 25

WOOSIM Porti-M200H Скачать руководство пользователя страница 14

http://www.woosim.com

13

Therefore, it is recommended to conduct the temperature control by thermistor in order to secure

safely of the system, and design shut-down of power source for the head (V

H

, V

DD

) when anomaly takes

place.

(18) If dusts/foreign articles stuck on the surface of thermal head substrate or printed circuit board. It may

cause stained print, faded print and also damage of heat element, smoking and combustion. In this case,

the head should be cleaned by ethyl-alcohol after power source for head is shut down and please check

if the dusts/foreign articles are completely removed.

Yet, make sure that ethyl-alcohol is dried up before restarting the operation.

(19) Please design power source for head (VH, VDD) to be shutdown when the thermal head surpasses the

maximum rated wattage while STB is On, or the printing medium does not move like paper jam.

Otherwise, heated printing medium bums and sticks to the head and may lead to combustion in the

worst case.

«
...
12
13
14
15
16
...
»

Содержание Porti-M200H


























Отзывы:

Нет отзывов