Woosim Systems WSP-i350, Руководство оператора

Страница: 20 / 30

WSP-i350 Rev. 4.1
http://www.woosim.com
20

FEED button : changing Printer MODE status. ( Power Lamp )

POWER button : changing OPTION status. ( Error Lamp )
[Example] The defaults of the printer are :
UART / 9600 bps / 8 data bit / No parity /1 stop bit / Density low /
Quality low / Mark use / Sensor High / 5 min Off
If a user wants to modify the defaults with
Bluetooth / 57,600 bps / 7 data bit / Odd parity /2 stop bit / Density high /
Quality high / Mark no use / Sensor Low / No use

Press FEED & POWER Button during the Error Lamp flickers 5 times.

You will see present COMMUNICATION mode in the LCD. (UART)

Press the POWER Button twice. And then, interface mode has set to
Bluetooth mode.

When you press FEED button once.

You will see present BAUD RATE mode in the LCD. (9600 bps)

Press POWER Button 3 times. And then, BAUD RATE has set to 57,600 bps .

When you press FEED button once.

You will see present DATA BIT mode in the LCD. (8 Data bit)

Press POWER Button once. And then Data Bit has set to 7 DATA BIT .

When you press FEED button once.

You will see present PARITY mode in the LCD.
(No parity)

Press POWER Button once. And then the Parity bit has set to ODD Parity Bit. .

When you press FEED button once.
 You will see present STOP BIT mode in the LCD.
(1 stop bit)
 Press POWER Button once. And then the density has set to 2 Stop bit .

When you press FEED button once.
 You will see present DENSITY mode in the LCD.
(Density low)

Press POWER Button twice. And then the density has set to Density high .