Woosh VLCD5, Руководство пользователя

Страница: 4 / 12

4.7、 Power assis
Power assis Power assis
Power assist level
t level t level
t level
Indicates the power assist level. There are 4 levels.
4.8、 Backlight
Backlight Backlight
Backlight
Switch between 2 levels brightness, default is backlight off.
4.9、 W WW Wheel heel heel heel- -- -diamet diamet diamet diameter setting er setting er setting er setting
Select wheel-diameter among14-32 inch. Default is 26-inch.
4.10、 Speed sensor setting Speed sensor setting Speed sensor setting Speed sensor setting
Select the number of spoke magnets used for the speed sensor, default value is 1.
4.11、 Speed unit Speed unit Speed unit Speed unit
Switch speed unit from
Km/h or Mil/h
..
4.12、 6
66
6km/h throttle setting
km/h throttle setting km/h throttle setting
km/h throttle setting
Select function of 6km, default is OFF.
4.13、 Maximum speed setting
Maximum speed setting Maximum speed setting
Maximum speed setting
Select max speed during 15-45km/h, Default is 25Km/h.
4.14、 Assist ratio setting (reserved) Assist ratio setting (reserved) Assist ratio setting (reserved) Assist ratio setting (reserved)
Select the ratio but default is 16.
.
4.15、 Zone setting (reserved) Zone setting (reserved) Zone setting (reserved) Zone setting (reserved)
Default is Europe.
Speed limit setting , default is ON.
4.16、 Software version Software version Software version Software version
Showing the current version of s/ware – currently 3.7
4.17、 Fault Fault Fault Fault code code code code
The system does a self-check when the kit is powered up. If there are any issues, a fault code will be
shown on the screen.
4.18、 Torque signal value (reserved) Torque signal value (reserved) Torque signal value (reserved) Torque signal value (reserved)
Torque signal value displays.
4.19、 Initial torquevalue (reserved) Initial torquevalue (reserved) Initial torquevalue (reserved) Initial torquevalue (reserved)
Initial torque signal value displays
5、Operation Procedure
5.1 5.1 5.1 5.1
Button Definition
+ - Info Power