WoongJin STM-7700, Руководство пользователя

Страница: 50 / 57

Q3. Mobile Device automatically turns OFF.
Make sure that you never run out of power. As soon as you see the dialog box
informing you that “the main battery power is very low” you must charge the battery
immediately. Continued use of the Mobile Device even after being informed of the
battery power level can cause battery failure.
To conserve Battery Power consumption, switching the Mobile Device state to suspend
after a specified period of time is advisable. This can be configured in the Power
Properties window Schemes tab. Specify the length of idle time before the Mobile
device switches to the state of suspend. See section about Manage Battery Life.
Q4. The Mobile Device would not Turn-ON.
When the Mobile Devices’ battery power is fully drained, the device will not power ON.
Connect the Mobile Device to an External Power source to charge the battery. If in case
the Mobile Device could still not be powered ON after recharging the battery, try
performing a hard reset.
For more information about Hard Reset,
.see “VII-2 – Initialize to factory default” section
of this manual.
Q5. Touchscreen - Stylus action does not result to the
desired action.
You may need to recalibrate the touchscreen using the Screen Properties window Align
Screen function.
For more information,
.see “IV – Terminal Settings, how to optimize” section of this
manual.
Troubleshooting
VI-1
50
STM-7700 User Manual 2010 Copyright © WoongJin ST