Woombikes WOOM, Руководство пользователя

Страница: 11 / 20

11
4.6. Adjusting seat height (woom 1 – 2)
For the woom 1, 1 PLUS and 2 the height of the seat can
be adjusted by opening the seatpost clamp with a hex key.
4.7. Using the quick-release lever (woom 3 – 6)
The quick release consists of two parts, the
adjusting
nut (1) and the clamping lever (2).
Opening: Turn the clamping lever to the limit stop,
so that you can see the inner side of the lever. To
loosen the quick-release device even more, turn the
adjustment nut counter-clockwise.
Closing: With open clamping lever in one hand, turn the adjusting nut in a clockwise direction
while holding the clamping lever with the other hand. Now tighten the nut. Then turn the
clamping lever using the palm of your hand in a manner that you can see the
outer side of the lever.
4.8. Pedals
The two pedals are marked with an L or an R
at the screw retained end. The pedal marked
with R needs to be screwed into the right
crank, and then tightened clockwise. The
same needs to be done with the other pedal
on the opposite side of the crank, which has
to be tightened counter-clockwise.
4.9. Pedal cranks and bearings
Cranks connect the pedals to the bottom bracket, and enable the drive through the inter-
action of these components when you ride a bicycle.
1
2
R
L
L