Hardware Parameter
Gimbal Spec
Camera Spec
Camera Object Tracking
Working voltage
Input voltage
Output voltage
Dynamic current
Idle current
Power consumption
Output
Local-storage
Control method
Pitch/Tilt
Roll
Yaw/Pan
Vibration angle
One-key to center
Imager Sensor
Picture quality
Effective pixel
Lens optical zoom
Digital zoom
Min object distance
Virtical viewing angle
Sync system
S/N ratio
Min illumination
Illumination range
Gain
White balance
Shutter speed
Exposure compensation
Backlight compensation
Aperture control
OSD
Update rate of deviation pixel
Output delay of deviation pixel
Minimum object contrast
SNR
Minimum object size
Maximum object size
Tracking speed
Object memory time
The mean square root values of pulse noise
in the object position
12V
4S ~ 6S
5V (connect with PWM)
550mA @ 12V
450mA @ 12V
≤
6.6W
-10 ~ +60
micro HDMI(HD output 1080P 60fps) / Network interface / SDI
SD card (Up to 128G, class 10, FAT32 or ex FAT format)
PWM / TTL / S.BUS
±90°
±85°
±170°
Pitch/Roll: ±0.01°, Yaw ±0.01°
√
1/3 CMOS
Full HD 1080 (1920*1080)
4.08MP
10x, F=3.2~33.6mm
12x (360x with optical zoom)
10mm(wide end) to 800mm(tele end)
Wide 62° ~ Tele 6.5°
Progressive scanning
more than 52dB
[email protected], 50%, 1/30s
100 lx ~100,000 lx
Auto/Manual
ATW1 (Narrow), ATW2 (Wide), single touch, manual (B, R)
1/1s to 1/10,000s, 22 steps
-12dB ~ +12dB (13steps in total)
Yes
16 steps
Yes
50Hz
<10ms
5%
4
16*16 pixel
160*160 pixel
±32 pixel/frame
100 frames (4s)
< 0.5 pixel
Working environment temp.
℃
℃
：
-
9-
±360°*N (IP/SDI output)