Woody Valley X-ALPS, Руководство пользователя

Страница: 9 / 24

2.1.3- Inserting the emergency parachute
Fasten the emergency parachute bridle using the two Velcro strips inside the parachute container, ensuring that the two loops leading to the
main karabiners are on opposite sides and emerge from the cockpit symmetrically, therefore with the same length. These two loops also
make it possible to adjust the height of the container. We recommend fastening the Velcro as shown in the photo, in other words with the
edge at the extremity of the container. If this is not satisfactory, remove the emergency parachute and repeat the steps as described below.
Then carefully arrange the bridle inside the container.
Insert the parachute into the harness container so that the deployment handle is visible and facing outwards, and with the loop that connects
the handle to the deployment back facing upwards. Thread a thin cord (such as a paraglider shroud line) into each elastic loop. This will make
it easier to close the container.
5