Woody Valley GTO LIGHT, Руководство пользователя

Страница: 35 / 39

33
6- MAINTENANCE AND REPAIR
Check the harness after every impact, bad landing or launch, or in the case that there are signs of damage or excessive wear.
We recommend having your harness checked by your retailer every two years, and replacing the main karabiners every two years.
To prevent unnecessary wear and deterioration of the harness, it is important to avoid scraping it against the ground, rocks or abrasive surfaces. Do not
expose the harness unnecessarily to UV radiation (sunlight) outside normal flying activities. Wherever possible, protect the harness from humidity and heat.
Store all your paragliding equipment in a cool, dry place, and never put it away while damp or wet.
Keep your harness as clean as possible by regularly cleaning off dirt with a plastic bristle brush and/or a damp cloth. If the harness gets exceptionally dirty,
wash it with water and a mild soap.
Allow the harness to dry naturally in a well-ventilated area away from direct sunlight.
If your reserve parachute ever gets wet (e.g. in a water landing) you must remove it from the harness, dry it and repack it before putting it back in the
container.
Repairs and replacement of harness components cannot be performed by the user, but exclusively by the manufacturer or staff authorised by the
manufacturer. The manufacturer and authorized service staff alone can use materials and techniques ensuring correct product functionality and its
complete conformity to product certification.
Zip fasteners should be kept clean and lubricated with silicone spray.
In the case of making any request to an official retailer or Woody Valley for maintenance operations, please quote the complete identification number shown
on the silver label in the rear pocket.
In order to create a high-performance, lightweight harness, the materials used are of excellent quality, but have a lower weight per square meter with
respect to standard harnesses. Therefore, pilots should take the utmost care when using and packing the GTO Light harness.