Woodway Engineering Ltd
Lower Road, Barnacle
Coventry, CV7 9LD
United Kingdom
Tel: +44 (0) 24 76 841750
Fax: +44 (0) 24 76 621796
www.woodwayengineering.com
I N S T A L L A T I O N G U I D E
2
This document is intended to be used as a reference guide for
the installation of the Multi-Link Switch Panel.
Every effort has been made to ensure the reliability and accuracy
of the information contained in this manual at the time of going
to press. However, specifications and procedures are subject
to change due to our constant endeavours to meet customer
requirements, and to maintain a research and development
process of continuous improvement for all Woodway products.
Woodway Engineering Ltd reserves the right to make changes
in product and documentation specifications and procedures at
any time and without notice. The information contained in this
manual is believed to be reliable and accurate with regard to the
Multi-Link Switch Panel. The company shall not be held liable for
improper installation, operation, or maintenance of the system
in circumstances where procedures and specifications have not
been followed correctly.
Disclaimer
Important Installation and Safety Notes
CAUTION!
Modules and connectors are not waterproof. Install modules and cables in a dry location away
from excessive heat, humidity and any components likely to damage the system.
It is the installers responsibility to ensure that;
•
The method of installation does not damage or interfere with the vehicle equipment and wiring.
•
If the vehicle is fitted with airbags, the installation does not interfere with the operation or effectiveness
of the airbags, or this will cause the equipment to become a projectile that could cause death or injury.
•
Fuse ratings are changed to suit specific applications.
The proximity of certain radio equipment may interfere with Multi-Link data transmission. To reduce this
possibility, Multi-Link and radio equipment wiring should always be kept well apart and should not, under
any circumstances, be harnessed or fastened together.
The installers should supply all mounting fixings.
It is the user’s responsibility to ensure that;
•
The system is used in a safe and responsible manner to ensure the safety of both themselves, their
passengers, other road users and pedestrians.
•
The system and its installation are properly maintained to ensure its effective operation.
Exercise caution when mounting the switch panel to the bracket to avoid the trapping of fingers.
WARNING!
Failure to follow these safety precautions and instructions could result in damage to the product
or vehicle, and/or serious injury to your passengers.
