Woodward easYgen-3000XT Series, Руководство пользователя, Страница: 837 / 1205

7.5.2 Supported J1939 ECUs & Remote Control Messages
The following table lists all ECUs, which are supported by the easYgen beyond the J1939
standard with the appropriate settings. We recommend "Device type" (parameter
╚═▷
15102 ) "Standard" or "Standard C" for all ECUs, which are not listed here. All other
parameters shall be clarified with the ECU manufacturer.
ECU Device type
(15102)
J1939
own
address
(15106)
Engine
control
address
(15107)
SPN
version
(15103)
Comment
Standard ECUs Standard Refer to
ECU
manual. Refer to
ECU
manual. Refer to
ECU
manual. Please refer to ╚═▷ “7.5.3 Device
Types "Standard" and "Standard C"”
for more details.
Standard ECUs
(with message
counter and
checksum) Standard C Refer to
ECU
manual. Refer to
ECU
manual. Refer to
ECU
manual. Please refer to ╚═▷ “7.5.3 Device
Types "Standard" and "Standard C"”
for more details.
Woodward EGS,
E3, E6, PG+ EGS Woodward 234 0 N/A
MTU ADEC ECU7 ADEC ECU7 MTU 1 128 N/A The easYgen is connected with the
SAM via CAN. The SAM communicates
with the ADEC using an own bus.
Deutz EMR2
Volvo EDC4
EMR2 Deutz 3 0 Version 1
Deutz EMR3
Deutz EMR4
(EDC 17)
Standard 3 0 N/A
Volvo EMS2
Volvo EMS1
Volvo EDC3
EMS2 Volvo 17 0 N/A The rated speed of the EMS1 and
EDC3 cannot be switched via the
easYgen.
Scania S6 S6 Scania 39 0 N/A
Scania S8 S8 Scania 39 0 N/A
MAN MFR/EDC7 MFR/EDC7 MAN 253 39 N/A The easYgen is connected with the
MFR via CAN. The MFR communicates
with the EDC7 using an own bus.
SISU EEM2/3 EEM SISU N/A 0 / (1) N/A
Cummins Cummins 220 0 N/A Notes
Some Cummins setups need a special
value for “Governor Gain” otherwise
they will shut down. In this cases
please set the “Governor Gain” of the
ECU to »Internal« instead of »J1939«.
MTU ADEC ECU8/
ECU9 ADEC ECU8/9
MTU 234 0 N/A The easYgen is connected with the
MTU system: ADEC ECU8 &
SmartConnect or ADEC ECU9.
Hatz EDC 17 Hatz EDC 17 3 0 N/A
ECU file ECU file N/A This is to support ECUs which are not
represented by the selection. Enter file
837 easYgen-3000XT Series B37574
7 Interfaces And Protocols
7.5.2 Supported J1939 ECUs & Remote Control Messages
Released