Woodward easYgen-3000XT Series, Руководство пользователя, Страница: 816 / 1205

6.5.2.6 Remotely Resetting The Default Values
6.5.2.6.1 Modbus
ID Parameter Setting range Data type
10417 Factory default settings Yes / No UNSIGNED 16
1701 Set factory default values Yes / No UNSIGNED 16
In order to enable the resetting procedure, parameter 10417 must be enabled.
Example 1 (enable resetting)
The resetting procedure shall be enabled.
• Modbus address = 40000 + (Par. ID + 1) = 410418 •
• Modbus length = 1 (UNSIGNED 16) •
⚙
ᐳ
Fig. 322: Modscan32 at address 410418
1. ▷
Use the "display options" to set the value format to decimal.
2. ▷ Double-click the address to issue a Write Register command.
▶
Fig. 323: Write register - enable the resetting procedure
╚═▷ Fig. 323 shows how the parameter is enabled using the ModScan32 Software. The
value must be set to "1" to enable the parameter.
Example 2 (reset to default)
In order to reset the default values, parameter ╚═▷ 1701 must be enabled.
816 easYgen-3000XT Series B37574
6 Application Field
6.5.2.6 Remotely Resetting The Default Values
Released