Woodward easYgen-3000XT Series, Руководство пользователя, Страница: 669 / 1205

ID Parameter CL Setting range
[Default]
Description
15154 Operation hours
source 2 This parameter configures the
source for the operation hours.
[Internal] The operation hours are counted
internal from the easYgen
ECU/J1939 The operation hours are assumed
from the connected ECU (via
J1939 CAN protocol).
2509 Operation hours
preset 0 0.00 to 999,999.99
[0.00]
When setting the operating hours
counter (refer to parameter
╚═▷
2574 ), the counter always will be
set up to the value configured
here.
2574 Operation hours set
0
1 Yes The current value of this counter
is overwritten with the value
configured in "Operation hours
preset" (parameter
╚═▷ 2509 ).
After the counter has been (re)set,
this parameter changes back to
"No" automatically.
[No] The value of this counter is not
changed.
Notes
1
The code level can be configured
with "Codelevel set operation
hours" (parameter
╚═▷ 2573 ). If
your current code level does not
match, this parameter is not
visible.
2573 Code level set
operation hours 5 0 to 5
[2]
This parameter defines which
codelevel is necessary to set the
operation hours (parameter
╚═▷
2574 ).
2515 Period of use preset 2 0.00 to 999,999.99
[0.00]
When setting the period of use
hours counter (refer to parameter
╚═▷ 2579 ), the counter always will
be set up to the value configured
here.
2579 Period of use set
0
1 Yes The current value of this counter
is overwritten with the value
configured in "Period of use
preset" (parameter
╚═▷ 2515 ).
After the counter has been (re)set,
this parameter changes back to
"No" automatically.
[No] The value of this counter is not
changed.
Notes
1
The code level can be configured
with "Code level f. set period of
use" (parameter
╚═▷ 2581 ). If
your current code level does not
match, this parameter is not
visible.
2581 Code level f.set
period of use 5 0 to 5 This parameter defines which
codelevel is necessary to set the
669 easYgen-3000XT Series B37574
4 Configuration
4.10.2 Service Reset Values
Released