Woodward easYgen-3000XT Series, Руководство пользователя, Страница: 624 / 1205

• Configure and check parameters at the easYgen (Select external terminals, Node-ID, •
DI/DOs, AI/AOs)
Reboot the device that the setting (15320 ) becomes effective
• If WAGO terminals are connected and the configuration of the external AIs and/or •
AOs is done, the easYgen must send a configuration string to the WAGO coupler one
time. This can be done by setting parameter »Configure external devices«
╚═▷
15134 to "YES". This must be repeated if there is any change in number or kind of
WAGO modules.
• If you have changed parameter »Select external terminals « ╚═▷ 15320 : reboot the •
device
• Set parameter »Configure external devices« ╚═▷ 15134 to "Yes" •
• Verify the successful configuration of the external device(s) •
Update WAGO After Any Change!
The update procedure described above must be repeated if there is any change in
number or kind of Wago modules.
ID Parameter CL Setting range
[Default]
Description
9940 This device 2 Node-ID 1-126
[Node-ID 7]
The Node-ID for the control unit
(this device) is configured here.
9930 1st Node-ID 2 Node-ID 1-126
[Node-ID 1]
This Node-ID's are used for the
communication with CANopen
devices.
Parameter ╚═▷ 15320 "Select
external terminals" offers often
used pre-settings and the
possibility to point to a file
containing customer specific
settings.
9931 2nd Node-ID 2 Node-ID 1-126
[Node-ID 2]
9932 3rd Node-ID 2 Node-ID 1-126
[Node-ID 3]
9933 4th Node-ID 2 Node-ID 1-126
[Node-ID 4]
9934 5th Node-ID 2 Node-ID 1-126
[Node-ID 5]
9935 6th Node-ID 2 Node-ID 1-126
[Node-ID 6]
15320 Select external
terminals 2 Notes
A change of this parameter
becomes only effective if the
device is rebooted! and:
the external devices itself must be
configured with the correct node
ID.
624 easYgen-3000XT Series B37574
4 Configuration
4.7.4.2.1 Expansion Modules at CANopen Interface
Released