Woodward easYgen-3000XT Series, Руководство пользователя, Страница: 599 / 1205

ID Parameter CL Setting range
[Default]
Description
• The mains total active power •
is not displayed.
Case 1: External mains active
power measurement (parameter
2966) is enabled:
• The mains power factor is •
calculated.
• The mains power factor •
monitoring is switched off.
• The mains power factor is not •
displayed.
• The mains total reactive •
power is not displayed.
• The mains total apparent •
power is calculated and
displayed.
Notes
Mains power monitoring is not
available.
Please make sure to assign the
external mains reactive power to
the corresponding analog data
source (parameter
╚═▷ 5794 ). The
same data source must be used if
the mains active power is
requested via interface.
[No] The mains reactive power is
internally measured.
5794 AM Ext.mains RPower 2 Determined by AnalogManager
81.20: [A1 = 06.02 Analog
input 2]
Typically an analog input is
selected as data source (kvar
value) which is connected to an
external transducer.
2970 Mains react.power
meas.resol.
(Mains reactive power
measurement
resolution)
2 This parameter controls the
resolution and the format.
Selected resolution: Power at 100 % analog value:
0.01kvar 10.00 kvar
0.1kvar 100.0 kvar
[1kvar] 1000 kvar
0.01Mvar 10.00 Mvar
0.1Mvar 100.0 Mvar
4.6.5 Engine
ID Parameter CL Setting range
[Default]
Description
1601 Engine rated speed 2 100 to 4,000 rpm Number of revolutions per minute
of the engine at rated engine
599 easYgen-3000XT Series B37574
4 Configuration
4.6.5 Engine
Released