Woodward easYgen-3000XT Series, Руководство пользователя, Страница: 300 / 1205

ID Parameter CL Setting range
[Default]
Description
5607 ) is configured to "3pos
controller".
5653 Expand deadband
factor 1 1.0 to 9.9
[1.0]
If the measured generator voltage
is within the deadband range
(parameter
╚═▷ 5650 ) and the
configured delay expand
deadband time (parameter
╚═▷
5654 ) expires, the deadband will
be multiplied with the factor
configured here.
Notes
This parameter is only visible if
voltage control (parameter
╚═▷
5607 ) is configured to "3pos
controller".
5654 Delay expand
deadband 1 1.0 to 9.9 s
[2.0 s]
The measured generator voltage
must be within the deadband
range for the time configured here
in order to multiply the deadband
with the factor configured in
parameter
╚═▷ 5653 .
Notes
This parameter is only visible if
voltage control (parameter
╚═▷
5607 ) is configured to "3pos
controller".
5618 AM Voltage SP1 [V] 2 Determined by AnalogManager
81.09
[A1 = 05.57 Internal v setp1
[V]]
The voltage setpoint 1 source may
be selected from the available
data sources.
The internal voltage setpoint
05.57 can be changed manually at
the setpoint screen of the display.
Notes
The voltage setpoint may be
adjusted within the configured
operating limits (
╚═▷ “4.5.1.1
Generator Operating Ranges:
Voltage / Frequency / Busbar”
).
5600 Int.voltage control
setpoint 1 2 50 to 650,000 V
[400 V]
The internal generator voltage
setpoint 1 is defined in this
screen. This value is the reference
for the voltage controller when
performing islanded and/or no-
load operations.
5619 AM Voltage SP2 [V] 2 Determined by AnalogManager
81.10
[A1 = 05.58 Internal v setp2
[V]]
The voltage setpoint 2 source may
be selected from the available
data sources.
The internal voltage setpoint
05.58 can be changed manually at
the setpoint screen of the display.
Notes
The voltage setpoint may be
adjusted within the configured
operating limits (
╚═▷ “4.5.1.1
300 easYgen-3000XT Series B37574
4 Configuration
4.4.4.1 Voltage Control
Released