Woodward easYgen-3000XT Series, Руководство пользователя, Страница: 134 / 1205

4.1.4.3 Status/Monitoring Screens
Fig. 93: Status/Monitoring screen (example)
Status/Monitoring screens display monitored values or set parameters.
Status/Monitoring screen Notes
Generator Which values are shown in the display and whether they are correct
depends on the measurement type.
Busbar/System Which values are shown in the display and whether they are correct
depends on the measurement type.
Mains Which values are shown in the display and whether they are correct
depends on the measurement type.
Analog inputs/outputs The analog outputs are displayed as a percentage of the selected
hardware range, i.e. 50% of a 0 to 20 mA output refer to 10 mA or
alternatively as absolute values (depending on selected parameters).
Discrete inputs/outputs The configured logic for the discrete input "N.O./N.C." will determine
how the easYgen reacts to the state of the discrete input.
If the respective DI is configured to N.O., the unit reacts on the
energized state, if it is configured to N.C., it reacts on the de-energized
state.
Counters and service For additional information on setting/resetting counters refer to ╚═▷
“4.10 Configure Counters” .
Engine —
Engine (J1939) —
J1939 Analog values —
J1939 Status —
Actual date and time —
Version —
Load diagnostic —
Table 27: Status/Monitoring screens samples
134 easYgen-3000XT Series B37574
4 Configuration
4.1.4.3 Status/Monitoring Screens
Released