18
MAINTENANCE
Regularly inspect the filter for damage. Replace damaged filters! Check tightness of the cas-
ing and of the sealing of filter and shavings bag regularly.
Electrical and electronic equipment must not be disposed of with household waste. Instead, hand
it over to a designated collection point for recycling. Contact your local authorities or retailer for
further information.
Copyright © 2014 Isojoen Konehalli Oy. All rights reserved. Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the written
permission of Isojoen Konehalli Oy is prohibited. The content of this document is provided "as is". Except as required by applicable law, no express nor implied warranties of any kind,
including the warranties of merchantability and suitability for a particular purpose, are made in relation to the accuracy, reliability or content of this document. Pictures in this document
are indicative and may differ from the delivered product. Isojoen Konehalli Oy follows a policy of ongoing development and reserves the right to make changes and improvements to the
product and this document without prior notice. EU Declaration of Conformity is not anymore valid and the warranty is voided if the technical features or other features of the product
are changed without manufacturer’s permission. Isojoen Konehalli Oy is not responsible for the direct or indirect damages caused by the use of the product.
2.
Push any overhang into the filter cartridge.
3.
Plug the filter cartridge (1) onto the motor cas-
ing (2). Place the entire motor casing on the
container and secure with the locking strap.
4.
Attach the other end of the suction hose using a
hose clamp and hose coupling.
5.
The dust collector is now ready for use. Before
connecting it to a power source, make sure the
power source is properly grounded and of
proper voltage.
