27
1.
Unplug the machine.
2.
Put the sawing unit in the upper position.
3.
Release the movable saw blade guard (11) by pressing the lock and lifting the saw blade
guard at the same time to free the saw blade.
4.
Release the saw blade fixing screw (
Attention:
left-handed thread).
5.
Remove bolt (3) and saw blade flange (4).
6.
Remove the saw blade carefully.
Caution:
risk of injury through saw blade teeth, use
gloves.
7.
Place the new saw blade onto the inner saw blade flange, observing the turning direction
of the saw blade.
8.
Put the outer saw blade flange in place and firmly tighten the screw.
9.
Return the saw blade guard to the correct position.
Replacing the laser’s batteries
1.
Remove the laser battery compartment cover (16). Remove both batteries.
2.
Replace both batteries with the same or an equivalent type. Make sure that the poles face
in the same direction as the old batteries.
3.
Close the battery compartment cover.
Periodic maintenance
-
Do not oil the mitre-saw, because cutting must be carried out in dry conditions. All rotat-
ing parts are self-lubricating.
-
During maintenance, wear protective gear if possible (accident-prevention goggles and
gloves).
-
Remove cuttings when necessary both from the cutting area, work surfaces and support
bases.
-
Use of an aspirator or brush is recommended.
ATTENTION:
Do not use compressed air
jets!
-
Regularly check blade conditions: if difficulties should arise during cutting, have it sharp-
ened by skilled personnel or replace it if necessary.
