Woodtec XW102, Инструкция по эксплуатации

Страница: 34 / 36

34
Problem Cause Solution
Engine fails to
start.
-
Overload protection
device disengaged.
-
Contact a qualified electrician
to engage the device.
Fails to split
logs.
-
Log is improperly
positioned.
-
Log size or hardness
exceeds the capacity of
the machine.
-
Wedge cutting edge is
blunt.
-
Oil leaks.
-
Unauthorized adjustment
was made on maximum
pressure limiting screw.
Lower pressure limit was
set.
-
Place the log correctly.
-
Check the size and hardness
of the logs to match the
machine capacity.
-
Sharpen the wedge.
-
Locate the leaks and contact
your dealer.
-
Contact your dealer.
The log pusher
moves jerkily,
making unusual
noise or
vibrating.
-
Low hydraulic oil level and
air in the hydraulic
system.
-
Check the oil level and refill if
needed.
Oil leaks.
-
Air in the hydraulic
system.
-
Air bleed screw has not
been tightened before
moving the machine.
-
Oil draining plug is not
properly closed.
-
Hydraulic control valve
assembly and/oir seal(s)
worn.
-
Loosen the bleed screw by
some rotations before
operating the log splitter.
-
Tighten the bleed screw before
moving the machine.
-
Tighten the oil drain plug.
-
Contact your dealer.