Woodstock STEELEX ST1000, Руководство пользователя, Страница: 10 / 52

-8-
ST1000 14" Bandsaw
Inventory
After all the parts have been removed from the two
boxes, you should have the following items:
Main Inventory (Figure 4) Qty
A. Body Assembly ............................................................ 1
B.
Miter Gauge .................................................................. 1
C. Table ................................................................................ 1
D.
Trunnion Support Bracket ....................................... 1
E. Motor with Pulley & Switch ..................................... 1
F.
Base Plate ....................................................................... 1
G. Legs .................................................................................. 4
H.
Front/Rear Leg Braces ............................................... 2
I. Side Leg Braces ............................................................ 2
J.
Body Support Braces ................................................. 2
K. Saw Blade ...................................................................... 1
L.
Hardware Bag ............................................................... 1
M. Hardware Bag ............................................................... 1
N.
Hardware Bag ............................................................... 1
Figure 4.
Inventory contents.
A
C
B
D
Figure 5. Fence inventory.
E
F
H
J
L
K
M
G
G
I
N
O
Q
P
R
S
Hardware Qty
• Carriage Bolts M8-1.25 x 16 (Stand) ...................34
• Flange Nuts M8-1.25 (Stand) ................................34
• Hex Bolts M8-1.25 x 35 (Body/Stand) .................. 4
• Flat Washers 8mm (Body/Stand) ........................... 4
• Lock Washers 8mm (Body/Stand) ......................... 4
• Hex Nuts M8-1.25 (Body/Stand) ............................ 1
• Cap Screws M8-1.25 x 25 (Motor) ......................... 2
• Fender Washers 8mm (Motor) ............................... 2
• Lock Washers 8mm (Motor) .................................... 2
• Plastic Cord Clamp (Motor Cord) .......................... 1
• Metal Cord Clamp (Switch Cord) ........................... 1
• Phillips Head Screw M5-.8 x 6 (Switch Cord) .... 1
• Star Washer 5mm (Switch Cord) ............................ 1
• Phillips Head Screws M5-.8 x 15 (Switch) ........... 2
• External Tooth Lock Washers 5mm (Switch) ..... 2
• Phillips Head Screws M5-.8 x 12 (Cords) ............ 2
• Hex Bolts M6-1 x 20 (Lower Blade Guides) ........ 2
• Flat Washers 6mm (Lower Blade Guides) ........... 2
• Hex Bolt M6-1 x 16 (Upper Blade Guide) ........... 1
• Hex Bolts M6-1 x 10 (Blade Guard) ....................... 2
• Fender Washers 6mm (Blade Guard) ................... 2
• Hex Bolts M8-1.25 x 30 (Table) .............................. 2
• Lock Washers 8mm (Table) ...................................... 2
• Knobs M10-1.5 (Table) .............................................. 2
• Hex Bolts M8-1.25 x 80 (Positive Stop) ............... 1
• Hex Nuts M8-1.25 (Positive Stop) ......................... 1
• Hex Bolts M6-1 x 10 (Fence Rails) ......................... 4
• Hex Bolts M6-1 x 20 (Fence Rails) ......................... 4
• Lock Washers 6mm (Fence Rails) .......................... 8
• Flat Washers 6mm (Fence Rails) ............................ 8
• Knob M10-1.5 x 25 (Fence) ...................................... 1
• Upper Guide Assembly ............................................. 1
• Lower Guide Assembly ............................................. 1
• Blade Guard .................................................................. 1
• Lower Guard ................................................................. 1
Fence Inventory (Figure 5) Qty
O. Fence Body .................................................................... 1
P. Rear Angled Rail .......................................................... 1
Q. Front Square Rail ......................................................... 1
R. Front Rail ........................................................................ 1
S. Hardware Bag ............................................................... 1