manualshive.com logo in svg

Woodstock Shop Fox W1834, Руководство пользователя, Страница: 33 / 42

Поделиться
Скачать
Woodstock Shop Fox W1834 Скачать руководство пользователя страница 33

-29-

Model W1834 (For Machines Mfd. Since 7/14)

SE

RV

IC

E

SYMPTOM

POSSIBLE CAUSE

POSSIBLE SOLUTION

Wavy pattern on 
workpiece surface.

1.  Machine vibrating.
2.  Workpiece loose in clamping device.
3.  Wheel face is uneven.
4.  Wheel grade is too hard.

1.  Shim/tighten mounting hardware.
2.  Correctly re-clamp workpiece.
3.  Dress wheel (

Page 26).

4.  Use softer grade wheel; reduce depth of cut and 

feed rate.

Lines on workpiece 
surface.

1.  Impurity on wheel surface.
2.  Workpiece loose in clamping device.

1.  Dress the wheel (

Page 26).

2.  Correctly re-clamp the workpiece.

Burned spots or 
cracks in workpiece.

1.  Improper abrasive type for work.
2.  Feed rate too slow.
3.  Depth of cut too great.
4.  Workpiece overheating.

1.  Use the correct type of grinding wheel (

Page 17).

2.  Increase feed rate.
3.  Reduce depth of cut; take multiple light passes.
4.  Grind in short durations and allow workpiece to 

cool in between.

Wheel dulls quickly, 
grit falls off.

1.  Depth of cut too great.
2.  Wheel grade is too soft.
3.  Wheel exposed to moisture.
4.  Wheel dressed incorrectly.
5.  Defective wheel bonding.

1.  Reduce depth of cut; take multiple light passes.
2.  Use harder grade of wheel.
3.  Store wheel away from moisture; replace wheel.
4.  Correctly dress the wheel (

Page 26).

5.  Replace wheel (

Page 27).

Wheel clogs and 
workpiece shows 
burn marks.

1.  Wheel grade is too hard.
2.  Feed rate too slow.
3.  Wheel dressed incorrectly.
4.  Workpiece incorrect material.

1.  Use softer grade of wheel.
2.  Increase feed rate.
3.  Correctly dress the wheel (

Page 26).

4.  Grind ferrous materials only.

Cutting tool is 
ground unevenly 
from one side to 
other.

1.  Tool not properly clamped.
2. Table and wheel not parallel with each 

other.

3.  Wheel dressed incorrectly or has impuri-

ties.

4.  Wheel is damaged.

1.  Properly re-clamp tool.
2.  Adjust table position to make it parallel with the 

wheel.

3.  Correctly dress the wheel (

Page 26).

4.  Replace wheel (

Page 27).

Содержание Shop Fox W1834











































Отзывы:

Нет отзывов