Woodstock SHOP FOX W1783, Руководство пользователя

Страница: 13 / 20

Model W1783 (Mfg. Since 2/07)
-11-
CLEANING & LUBRICATION
Cleaning
Use a good solvent to clean the nose
assembly of the nailer. Always be sure
that the nailer is dry before using it
again.
Do not allow dust, chips, sand, etc.
into the air connectors or into the body
of the nailer; this may result in leaks
and damage to the nailer and the air
couplings.
Lubricating
Place two to six drops of pneumatic tool
oil in the nailer air inlet (as shown in
Figure 11
) every 2 hours of continuous
use. Wipe off any excess oil near the
nailer exhaust to avoid dust build-up.
Another option to manual oiling would be
to simply install a lubricator in your air
compressor line. If your air compressor
line already has a lubricator, then regular
lubrication of your nailer will not be
necessary. Just make sure there is always
oil in the lubricator.
Figure 11. Lubricating nailer via air inlet.
Never clean this tool with gasoline
or other flammable liquids. Vapors
in the tool may ignite, causing
the tool to explode. Ignoring
this warning may lead to serious
personal injury or even death!