ASSEMBLY
-15-
Figure 18.
Attach belt guard to stand
with the hex bolt.
Belt Guard
Attach the belt cover to the cabinet stand with
the
5
⁄
16
"-18 x 2
1
⁄
2
" hex bolt and
5
⁄
16
" flat washer
as shown in
Figure 18
.
Knife Gauge
The knife gauge consists of a steel rod, two
adjuster arms and two E-clips.
To assemble the knife gauge:
1.
Insert the steel rod through each adjuster
arm.
2.
Snap the E-clips into the grooves at the ends
of the steel rod so your assembly looks like
the knife gauge shown in
Figure 19
.
See
page 16-17 for usage instructions.
Control Pedestal
1.
Mount the control pedestal to the back of
the cabinet stand as shown in
Figure 20
.
2.
Secure the control pedestal with the (4)
5
⁄
16
"-18 x 1" hex bolts, (4)
5
⁄
16
"-18 hex nuts
and (8)
5
⁄
16
" washers from the hardware
bag.
Figure 19.
Knife setting gauge.
Figure 20.
Mounting pedestal switch to stand.
Make sure that your
machine is unplugged
during all assembly pro-
cedures! If this warning
is ignored, serious per-
sonal injury may occur.
