manualshive.com logo in svg

Woodstock SHOP FOX W1671, Инструкция по эксплуатации


Поделиться
Скачать
background image

Model W1671 (For Machines Mfd. Since 01/02)

-

2

-

INTRODUCTION

We are proud to provide a high-quality owner’s 

manual with your new machine!

We made every effort to be exact with the 

instructions, specifications, drawings, and pho-

tographs contained inside. Sometimes we make 

mistakes, but our policy of continuous improve-

ment also means that 

sometimes  the  machine 

you receive will be slightly different than what 

is shown in the manual

.

If you find this to be the case, and the difference 

between the manual and machine leaves you 

confused about a procedure, check our website 

for an updated version. We post current manuals 

and  manual  updates  for free on our website at 

www.woodstockint.com

.

Alternatively, you can call our Technical Support 

for help. Before calling, make sure you write 

down the 

Manufacture Date

 and 

Serial Number

 

from the machine ID label (see below). Also, if 

available, have a copy of your 

original purchase 

receipt

 on hand. This information is required for 

all Tech Support calls.

MODEL XXXX

MACHINE NAME

Motor:
Specification: 
Specification:
Specification:
Specification:
Weight: 

Specifications

To reduce risk of serious personal injury when using this 
machine:
  1. Read & understand owner’s manual before operating.
  2. Always wear approved eye protection and respirator.
  3. Only plug power cord into a grounded outlet.
  4. Only use this machine to collect wood dust/chips—never 

use to collect glass, metal, liquids, asbestos, silica, 
animal parts, biohazards, burning material/ashes, etc.

  5. Always disconnect power before servicing or cleaning.
  6. Do not expose to rain or wet areas.
  7. Keep hands, long hair, and loose clothing away from 

inlet.

  8. Never leave machine unattended while it is running.
  9. Do not use if cord/plug becomes damaged—promptly 

repair and protect cord from future damage. 

 10. Do not use without dust bag or filters in place.
 11. Always wear a respirator when emptying bags.
 12. Prevent unauthorized use by children or untrained users.

Date

Serial Number

Manufactured for Woodstock in Taiwan

WARNING!

Manufacture 

Date

Serial Number

Manual Accuracy

We are committed to customer satisfaction. If 

you have any questions or need help, use the 

information below to contact us. 

IMPORTANT: Before contacting, please get the 

original purchase receipt, serial number, and 

manufacture date of your machine. This infor-

mation  is  required  for  all  Technical  Support 

calls and it will help us help you faster. 

Woodstock International Technical Support

Phone: (360) 734-3482

Email: [email protected]

We want your feedback on this manual. What did 

you like about it? Where could it be improved? 

Please take a few minutes to give us feedback.

Technical Documentation Manager

P.O. Box 2309

Bellingham, WA  98227

Email: [email protected]

Contact Info

INTRODUCTION

Содержание SHOP FOX W1671







































Отзывы:

Нет отзывов

Похожие инструкции для SHOP FOX W1671

Бренды по названию

Популярные бренды

Загрузить еще бренды