manualshive.com logo in svg

Woodstock SHOP FOX M1118, Руководство пользователя

Поделиться
Скачать
Woodstock SHOP FOX M1118 Скачать руководство пользователя страница 24

Avoid.chlorine-based.solvents,.such.as.

acetone. or. brake. parts. cleaner,. that.

may.damage.painted.surfaces.

Always wear safety glass-

es during the entire main-

tenance process!

-22-

Model M1118 (For Machines Mfd. Since 09/21)

M

A

INTE

N

A

N

CE

MAINTENANCE

Cleaning the Model M1118 is relatively easy. Use a brush to 

clear away any metal debris and dust from the clamping 

fingers, clamping base, and bending blocks.

Use a shop rag to carefully apply a thin coat of quality 

metal protectant to all exposed unpainted surfaces to 

prevent corrosion.

Cleaning.&.Protecting

For optimum performance from this machine, this 

maintenance schedule must be strictly followed.

Ongoing

To minimize your risk of injury and maintain proper 

machine performance, stop operations immediately if you 

ever observe any of the items below, and fix the problem 

before continuing operations:

•  Loose mounting bolts.

•  Worn or damaged clamping fingers.

•  Any other unsafe condition.

Daily.Maintenance

•  Lubricate clamping leaf pivots.

•  Lubricate bending leaf pivots.

Weekly.Maintenance

•  Lubricate clamping leaf guide pin slots.

General

Содержание SHOP FOX M1118

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды