Woodson WGPC61, Руководство по установке и эксплуатации

Страница: 9 / 30

INSTALLATION,OPERATION & MAINTENANCE
Woodson Contact Toaster – WGPC61
Tel: 1300 79 1954 Web: www.stoddart.com.au Email: fse@stoddart.com.au
Due to continuous product research and development, the information contained herein is subject to change without notice
Page 7
Setting Up
Handling
 Use suitable means to move the appliance: eg. A lift truck or fork pallet trucks (the forks should
reach more than halfway beneath the appliance).
Site Preparation
 Ensure the site is level and properly cleaned.
 The toaster is to be placed on a suitable bench or worktop, at a comfortable working height. (850mm –
900mm)
 Ensure the press toaster is placed on a level, stable work surface, away from other heat, water or grease
emitting devices.
Unpacking
 Check the machine for damage before and after unpacking. If machine is damaged, contact the
dealer.
 Wear protective gloves to unpack the appliance from the box.
 The unit is supplied fully assembled.
 Unpack and visually inspect the unit for damage or missing parts. Report any problems to the distributor
or manufacturer.
 Remove all protective plastic film, tapes, ties and packers before installing and operating. Clean
off any glue residue left over from the protective plastic film.
 Wipe all surfaces with a clean, sanitised cloth.
First Time Operation
 Read the complete instruction manual before proceeding.

The toaster is preset in the factory with the following settings:
o
Cooking temperature 205 degrees C.
o
The timers have not been factory set.
o
Refer to Section“ Setting the timers” Page 13
 Plug the unit into a power source. Ensure the electrical cable is not damaged and does not hang over the
counter, and the “ON/OFF” button is set to the “OFF” position.
 Your toaster is ready to use.