manualshive.com logo in svg

Woods 872311G, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Woods 872311G Скачать руководство пользователя страница 18

18

WOODS

At operator's right side

KEYSWITCH (K) 

- 

The keyswitch has three 

positions:  

OFF

, 

RUN

, and 

START

.  Insert the key 

and turn it clockwise to move the switch from 

OFF

 to 

RUN

.  Turn it further to 

START

 and hold to engage 

the starter.  Release the key and the switch will return 
to 

RUN

 from 

START

.  Turn the key counterclockwise 

to 

OFF

 to stop the engine.

THROTTLE (T)

 - 

Move the throttle lever forward to 

increase engine speed until the maximum governed 
engine 

RPM

 is reached.  Move the lever rearward to 

decrease engine speed until the engine reaches its 
idle speed.

CHOKE (C)

Pull the choke control out to set the choke 

ON

.  Push 

it in to set the choke 

OFF

.

POWER TAKE OFF (PTO) SWITCH

 

(P)

 - 

The operator must be in the seat when engaging the 

PTO

 or the engine will kill.  Pulling the 

PTO

 switch 

out engages (turns on) the 

PTO

 and starts the blades 

or other attachment.  Pushing the 

PTO

 switch in 

disengages (turns off) the 

PTO

 and stops the blades 

or other attachment.  

NOTE:

  The 

PTO

 switch does not control 

attachments powered by a separate engine.

-

 

Disengage the 

PTO

 whenever you stop or leave 

the operator’s position

-

 

Shut off engine with the key and remove the 
spark plug wires before making adjustments or 
unplugging a clogged mower.

-

 

Do not engage the 

PTO

 until ready to start 

mowing.

HOUR METER (M)

 - Records accumulated time 

the machine is in operation and provides service 
alerts.  Push and release MODE button to toggle 
between functions.  Provided service alerts include 

change engine oil and filter, change hydraulic oil, 

and service air filter.  When the service time is 

approaching, an alert message will flash temporarily, 

interrupting whatever mode the meter is in.  This 
will continue until the alert is reset.  When the 
service interval reaches "0" hours, the word "NOW" 
replaces the hours remaining.  To reset the service 
alert, depress and hold down the mode button for 6 
seconds while in the alert to be cleared.

CONTROLS

Содержание 872311G











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды