Woods 600000, Руководство пользователя

Страница: 11 / 22

Page 11
STEP 3:
Attach the tongue assembly (1) to the tank assembly (3) using two 3/8 NC x 4 hex bolts (10), four 3/8 flat washers (11)
and two 3/8 NC nylock nuts (12). Tighten hardware.
STEP 4:
Stand the beam assembly (4) up on end. Two people may be needed for this step to ensure safety. Make sure that the
beam is stable and on a level surface. Roll the tongue and tank assembly into position between the two tabs on the
beam. Install 5/8 NC hex flange screw (13) and 5/8 NC flange lock nut (14). Tighten nut to remove excess play but still
allow beam to pivot.
ITEM DESCRIPTION QTY
1
Tongue Assembly
1
3
Tank Assembly
1
10
3/8 NC x 4 Hex Bolt, GR5
2
11
3/8 Flat Washer
4
12
3/8 NC Nylock Nut
2
ITEM DESCRIPTION QTY
4
Beam Assembly
1
13
5/8 NC x 4-1/4 Hex Flange Screw, GR5
1
14
5/8 NC Flange Lock Nut
1