WOOD'S POWR-GRIP LJ6VH, Руководство по техническому обслуживанию, устранению неполадок и ремонту

Страница: 2 / 4

TROUBLESHOOTING GUIDE
PROBLEM CAUSE CORRECTION
Slow leakage
Cuts on sealing edge Replace vacuum pad.
Dirt or lint inside pump
Wipe inside of handle with a soft cloth. Check for
contamination on U-cup or button.
Dry pump Apply a light coating of plunger lube inside handle.
Contaminated pad face Clean vacuum pad.
Severe leakage
Severe contamination Clean plunger assembly and inside of handle.
Gouges or cuts on sealing
edges
Replace vacuum pad.
Jammed or
sluggish pump
Obstructed valve inlet
Remove obstruction from suction inlet (behind air filter)
or from space between handle and pad.
Severe contamination Clean plunger assembly and inside of handle.
Dented or cracked handle Replace handle.
Bent or cracked plunger Replace plunger assembly.
Pad slips when
attached
Contaminated load surface Wipe surface clean. If necessary, wash and allow to dry.
Contaminated pad face Clean vacuum pad.
Slick or worn pad face Replace vacuum pad (at least once every two years)
More than
10 strokes
needed to apply
Any of the above Perform general maintenance.
Dirt or lubricant on check valve
Remove, clean and reinstall plunger assembly, retainer
and check valve as directed in Disassembly and
Assembly sections.
PARTS AND ASSEMBLY
1 90115 Handle, Vertical
2 61130RP Handle, Angle Grip
3 90520AM Plunger Assembly, Metal
90524AM Plunger Assembly, Metal with Audio Alarm (WBP)
4 90154AM Plunger Assembly, Industrial-Grade Plastic
5 49416T Vacuum Pad, 6" (15 cm) Dia., Concave (LJ6)
6 49386T Vacuum Pad, 6" (15 cm) Dia., Concave (TL6)
7 Air Filter*
8 Red Line
9 Check Valve Retainer*
10 Check Valve*
11 Release Tab
12 10006 Screws, 10-32 x 5/16" (4)
13 10014 Screws, 10-32 x 7/16" (4)
14 Button and U-Cup
Not Shown
29312 Pad Cover, 6" (15 cm)
Plunger Lube*
*Repair Kit # 90160
4
2
6
7
8
9
10
11
13
14
3
8
9
10
5
7
1
11
12
14